EtherLink Lite

Home

Products

Terms and conditions

Telephone: +44(0)1299 250991

Email: sales@ikonavs.com

Home iKON PRO Ethernet

EtherLink Lite

Click for larger image

May also be
of interest

EtherLink Lite

Manufactured in a lightweight plastic enclosure for easy attachment to the device being controlled.

Supporting baud rates up to 230.4Kbps it can operate as a client or server utilising either TCP or UTP protocols with set up via the network.

Power, Link, Data and RX / TX indicators are fitted along with an Ethernet socket and a RJ12 socket for the RS232 connection. A short RJ12 to bare end break out cable is included.

DC power is via a micro USB socket and requires 5V at 200mA. No power supply is included as this can often be supplied via a USB socket on the controlled device.

The EtherLink Lite is a streamlined version of the EtherLink 232 and an ideal solution for remotely controlling RS232 devices over Ethernet via your LAN / WAN network or even the Internet.

Synergy E2083

Synergy Controlers

Technical Specification

Ethernet port for connection to LAN / WAN network and can be configured as a Client or Server supporting four simultaneous clients in server mode utilising either TCP or UTP protocols. 10/100 auto detect interface and supports auto MD/MDIX so can use a crossover or parallel cable.

Bi-directional RS232 port for communication with devices at baud up to 230.4K. Can be used for baud rate conversion between source and destination. The EtherLink also offers Virtual serial port support.

Power requirements 5V DC, 200mA

Size = 65mm x 65mm x 28mm, Net weight 65gm without cable.