• A bi-directional RS232 port gives control over projectors, displays and other RS232 devices.
• Two IR ports supporting emitters for control of devices such as video players, receivers and amplifiers.

• RS232 and IR commands can be loaded from the embedded libraries or user created files.
• Two inputs, one which can be used with an external PIR sensor for room occupancy sensing, the second can be used to either lock the panel or power off the system. Both can also be used as an extra button input which can operate independently from or in parallel with a main panel button.

• Two outputs can be configured to control motorised screens*, control projector lifts*, control projector power switching or be controlled independently by any button including timed functions or as  indication of external buttons.
• Syn-Link port provides linking of panels in multi-room systems & connection to Synergy peripherals.
• Synergy 2081 firmware upgrades allow the  Syn-Link port to operate as second bi-directional RS232 port gives control over other RS232 devices.
• Synergy 2082 firmware upgrades allow the full control of the Synergy via the Syn-Link, using arbitrary RS232 strings allowing the unit to tie into existing third party systems.
• Will fit a standard depth UK back box and is provided with detachable screw terminals for ease of installation.

* requires SPC-PP1

Push Buttons

RS232 serial port:

Outputs:

Input:          

Connector:

Power:

Size:    

Eight with internal Green Led and can be user labelled.

Bidirectional, Baudrates  9600, 19200, 38400, 57600, 115200  

Parity None, even or odd

2 x Open collector,  50mA max, 12V max, Fitted with ‘recirc’ diodes

Screen raise/lower periods 1 to 255 minutes

2 with a maximum input voltage of 5V D.C & fitted with 10K Ohm pull-up resistor to 5V.

When used for room occupancy detection, port 1 offers:

             PIR output 0V min. to 5V max. or open collector,

              Output can be either low or high (on or off) for motion detected.

             Room empty period detection can be 1 to 255 minutes

10 way & 8 way 3.5mm pitch detachable screw terminals.

12V DC @ 210mA  Max + external relay current.

12V, 300mA power supply included.

146mm x 86mm x 30mm deep  ( 44mm back box recommended).

Nett weight = 220g

The Synergy 2080 is an 8 button controller mounted on a UK 2 gang white metal panel. Ideal for basic control of projectors, LED displays and other devices via RS232, IR or both.

RS232 and IR commands can be loaded from the embedded libraries or user created files.

Two outputs are provided for control of external relays or indicators for screen control etc. It also has two external inputs for use with an external switch or a PIR detector for additional control functions or shutdown.

The 2080 can be programmed using the quick and easy software using a simple menu structure with 'drag and drop' configurations along with both central and user created libraries for both RS232 and IR functions.
See how to document here.

The Syn-Link port provides linking of panels in multi-room systems and connection to Synergy peripherals. This port can be upgraded to operate as a second bi-directional serial port to control other equipment.

Automatic button label generation and printing is included within the software.

The Synergy 2080 can be upgraded with the add on Ethernet adapter. (SYN-ETH)
This will then allow for remotely controlling RS232 serial devices as well as control of the Synergy 2080 over Ethernet via your
LAN / WAN network or even the Internet.
Click here for more info on the Ethernet upgraded version of the Synergy 2080.

Detachable screw terminals are used for all outgoing and power connections for ease of installation.

Power supply included. UK supplied normally or add "/EU" to order code for European supply.